This AMC 304 turnkey crate engine by Tuff Dawg Engines would be EXCELLENT for that AMC passenger car or Jeep (including Wagoneer etc). This engine comes equipped with a Edelbrock Performer square bore flange intake that works best with a 570cfm carb (not included) and will run on leaded or unleaded regular pump fuel.

The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

• 3.438" stroke crank
• 5.875" connecting rods reconditioned with ARP rod bolts
• 8.4 to 1 compression pistons

More special features of this engine include:

• New Hydraulic flat tappet cam
• Heads have 1.790"Int/1.410"Exh valves
• New 1.440" high performance springs setup to match cam
• New Rocker arms
• New Push rods
• New Perfect Circle rings
• New Double row timing set for added strength
• New Brass expansion plugs
• New Edelbrock Performer aluminum intake manifold - This intake has provisions for the oil filler tube and the popular 3/4" PCV valve
• Oiling modifications include a front to rear steel oil tube - This steel tube takes oil from the front of the block to the rear of the block where it is needed most.
  Lifter valley drilled for faster oil return to the oil pan.
• All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with oil pan, timing cover, harmonic balancer, chrome valve covers, and an Edelbrock Performer aluminum intake manifold.

This Is A Real Turnkey Engine

This engine has been started on gas and run. The camshaft has been broken in and the valves adjusted. Carburetor and timing has been initially set, but should be checked after installing in vehicle.

Also included and installed on engine:

•  4 barrel carb
• Mechanical fuel pump
• Chrome air cleaner
• Fuel filter
• Electronic distributor and coil
• Spark plugs and spark plug wires
• Water pump
• Crankshaft and water pump pulleys
• Alternator with bracket and alternator belt
• Starter
• Water outlet and thermostat
• Starter alignment plate for back of block
• A/T Flexplate with bolts
• This engine has been started on gas and run. Carburetor and timing has been initially set, but should be checked after installing in vehicle.

Not included on this engine:

Exhaust manifolds, hoses, fan, accessory belts (except alternator belt), radiator, linkage or miscellaneous.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.