The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

• 3.680" stroke forged steel crank
• 5.858" forged connecting rods reconditioned with ARP rod bolts
• 9.8 to 1 compression pistons

More special features of this engine include:

• Block is sonic tested
• Forged steel crankshaft
• New CompCam Hydraulic flat tappet cam
• 58cc heads with 2.02"Int/1.600"Exh valves
• New 1.440" high performance springs setup to match cam
• New Screw-in rocker studs
• New Roller tipped rocker arms
• New Hardened push rods
• New Perfect Circle rings
• New Double row timing set
• New Brass expansion plugs
• New Edelbrock RPM Air Gap aluminum intake manifold - The Air Gap design features an open air space that separates the runners from the hot engine oil that results in a cooler, denser charge for more power. This intake also has provisions for the oil filler tube and the popular 3/4" PCV valve
• Oiling modifications include a front to rear steel oil tube - This steel tube takes oil from the front of the block to the rear of the block where it is needed most.
  Gallery to gallery equalization tube in the rear of the block.
  Lifter valley drilled for faster oil return to the oil pan.
  New Milodon 8 quart oil pan with 9" rear sump that improves performance through increased capacity and strategically placed horizontal baffling for oil control and fits in all applications that originally had V8 engines (including Jeep)
• All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with Milodon 8 quart oil pan, timing cover, harmonic balancer, chrome valve covers, and an Edelbrock Dual Plane Air Gap aluminum intake manifold.

This Is A Real Turnkey Engine

This engine has been started on gas and run. The camshaft has been broken in and the valves adjusted. Carburetor and timing has been initially set, but should be checked after installing in vehicle.

Also included and installed on engine:

• Holley 4 barrel carb
• Mechanical fuel pump
• Chrome air cleaner
• Fuel filter
• Electronic distributor and coil
• Spark plugs and spark plug wires
• Water pump
• Crankshaft and water pump pulleys
• Alternator with bracket and alternator belt
• Starter
• Water outlet and thermostat
• Starter alignment plate for back of block
• A/T Flexplate with bolts
• This engine has been started on gas and run. Carburetor and timing has been initially set, but should be checked after installing in vehicle.

Not included on this engine:

Exhaust manifolds, hoses, fan, accessory belts (except alternator belt), radiator, linkage or miscellaneous.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.