Update your old ride with a Tuff Dawg EFI engine with todays technology! This Chevy 350 EZ-EFI® turnkey crate engine by Tuff Dawg Engines would be EXCELLENT for just about any street rod.
Would also be suitable for other applications (call or email us for
details). With 330HP @ 5000rpm and 390ft lbs
of torque @ 3500rpm it has good all around power, and works well with either
a manual or automatic transmission. This engine has enough cam to let you
know it has good all around power but not too big as to need to change to a
different stall speed convertor. This engine will run on leaded or unleaded pump
fuel.
The balanced rotating assembly (typically includes crankshaft,
pistons, rings, connecting rods, rod bearings, and balancer) featured in
this engine:
3.484" stroke nodular iron crank
5.7" forged rods with ARP rod bolts
9 to 1 compression flat top pistons
More special features of this engine include:
Seasoned 4-bolt main block
Deck head gasket surface on block to ensure a good seal
New CompCams hydraulic flat tappet high performance cam
76cc heads with 1.940"Int/1.500"Exh valves
New 1.250" high performance springs set up to match cam
New High temperature valve seals
New Spiral-type valve guides
New Screw-in rocker studs with guide plates
New Steel rocker arms with balls and nuts
New Hardened push rods
New Perfect Circle rings
New Double row timing set
New High volume oil pump with welded big pickup screen and
steel drive shaft and steel guide
New Brass expansion plugs
New Edelbrock (non-egr) Dual Plane Performer aluminum intake
All parts are painted separately before assembly for that show quality
look
This Is A Real Turnkey Engine
This engine has been started on gas and run. The camshaft has been broken in and the valves adjusted. The 4150 throttle body and timing has been initially set, but should be checked after installing in vehicle.
Also included and installed on engine:
New Chrome oil pan
New Chrome timing cover with Chevrolet "bowtie" stamped in the middle
New Chrome valve covers with "bowtie" stamp to match timing cover
New Chrome air cleaner
New Chrome dipstick and chrome tube
New EZ-EFI® self tuning fuel system. Complete package including ecu, throttle body, fuel rails, wide band O2 sensor, wiring harness, fuel injectors, and electric fuel pump. The easy to use setup wizard provides a comprehensive walk through and the system tunes itself.
New Electric fuel pump.
New Fuel regulator
New Fuel filter
New PCV valve
New HEI distributor
New Accel 8mm suppression spark plug wires
New Spark plugs
New Water pump with long nose
New Chrome water pump pulley
New Chrome crankshaft pulley
Alternator with internal regulator
New Chrome alternator brackets
New Water outlet
New Thermostat
New High torque starter
New 168 tooth flexplate for A/T
This engine has been started on gas and run. The 4150 throttle body and timing has
been initially set, but should be checked after installing in vehicle.
This engine is custom built from start to finish in our
state of the art facility by professionals that take pride in their
work to guarantee that you get a top quality engine the first time!.
Hear this engine run!
This engine is covered by a 1 year written warranty.
(There is no warranty when using a Blower, Turbo, Super Charger or NOS)
If you have any questions regarding this item please call us at
D&J Machine & Performance Engines
(602) 395-0800 Mon-Fri 8:00AM to 5:00PM MST
Current Phoenix Time NOTE: Arizona does not observe Daylight Savings Time
or email us at
enginebuilder_1
![[Company Logo Image]](images/Tuffdawg1_sm.gif)
