The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

• 3.750" stroke nodular iron crank
• 5.7" forged rods with ARP rod bolts
• 9.2 to 1 compression flat top pistons

More special features of this engine include:

• Seasoned 4-bolt main block with one piece rear main seal to prevent oil leaks
• Block has provision for mechanical fuel pump
• Engine comes with automatic transmission flexplate - 14" diameter, 168 teeth
• Deck head gasket surface on block to ensure a good seal
• New CompCams hydraulic flat tappet high performance cam
• 76cc heads with 1.940"Int/1.500"Exh valves
• New 1.250" high performance springs set up to match cam
• New High temperature valve seals
• New Spiral-type valve guides
• New Screw-in rocker studs with guide plates
• New Steel rocker arms with balls and nuts
• New Hardened push rods
• New Perfect Circle rings
• New Double row timing set
• New High volume oil pump with welded big pickup screen and steel drive shaft and steel guide
• New Brass expansion plugs
• New Edelbrock (non-egr) Dual Plane Performer aluminum intake
• All parts are painted separately before assembly for that show quality look

This Is A Real Turnkey Engine

This engine has been started on gas and run. The camshaft has been broken in and the valves adjusted. The 4150 throttle body and timing has been initially set, but should be checked after installing in vehicle.

Also included and installed on engine:

• New Chrome oil pan
• New Chrome timing cover with Chevrolet "bowtie" stamped in the middle
• New Chrome valve covers with "bowtie" stamp to match timing cover
• New Chrome air cleaner
• New Chrome dipstick and chrome tube
• New EZ-EFI^® self tuning fuel system. Complete package including ecu, throttle body, fuel rails, wide band O₂ sensor, wiring harness, fuel injectors, and electric fuel pump. The easy to use setup wizard provides a comprehensive walk through and the system tunes itself.
• New Electric fuel pump.
• New Fuel regulator
• New Fuel filter
• New PCV valve
• New HEI distributor
• New Accel 8mm suppression spark plug wires
• New Spark plugs
• New Water pump with long nose
• New Chrome water pump pulley
• New Chrome crankshaft pulley
• Alternator with internal regulator
• New Chrome alternator brackets
• New Water outlet
• New Thermostat
• New High torque starter
• New 168 tooth flexplate for A/T
• This engine has been started on gas and run. The 4150 throttle body and timing has been initially set, but should be checked after installing in vehicle.

Not included on this engine:

Exhaust manifolds, hoses, fan, accessory belts (except alternator belt), radiator, linkage or miscellaneous.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.