[Company Logo Image]

Home Feedback Contents Search

Ford 302 EFI 92-96 4x4

 

Home
Up

Ford 302 EFI 4x4 92 - 96 Crate Engine by Tuff Dawg EnginesIf you are looking to upgrade that old, tired Ford 5.0L 302 in your 1992 to 1996 Bronco this Ford 302 crate engine by Tuff Dawg Engines is the answer. Using a Edelbrock EFI upper and lower intake, and a CompCam computer compatible cam this Ford 5.0L 302 engine will bolt right in place of your old 5.0L 302 engine to wake up your Bronco or pickup and give it more power than it ever has had! This Tuff Dawg high performance engine puts the focus on low and midrange power, exactly where needed most in a 4x4 or pickup. No modifications are needed as your stock computer and fuel system will work with this engine.

The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

  • 3.000" crank 
  • 5.090" rods with ARP rod bolts
  • 9 to 1 compression pistons

More special features of this engine include:

  • Seasoned block that has been vatted, magnafluxed for cracks, thermal cleaned and steelabrated, bored, honed and plateau honed to fit new flat top oversized pistons
  • Deck head gasket surface on block to ensure a good long lasting seal
  • New CompCam computer compatible hydraulic roller cam to put the focus on low end and midrange power
  • Cast iron heads have 3-angle valve job
  • Heads have 1.780"Int/1.450"Exh valves
  • Both heads have been resurfaced to ensure a good long lasting seal
  • New Hardened exhaust seats for use with leaded or unleaded fuel
  • New High performance springs set up to match cam
  • New Valve seals
  • New Valve guides
  • New Screw-in rocker studs
  • New 1.6 roller tip rocker arms with balls and nuts
  • New Oversize pistons and rings
  • New Heavy duty double row timing set
  • New Oil pump
  • New Brass expansion plugs
  • New Main and rod bearings to fit 3.000" stroke crankshaft
  • New Edelbrock Performer EFI aluminum intake manifold. Includes lower intake and upper plenum that has a removable plate to access runners. This modular design incorporates the latest air flow technology and computer aided design for maximum torque gains in the midrange where your Bronco or pickup needs it the most
  • This engine will pass emissions and is 50 states legal
  • All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with rear sump oil pan, timing cover, harmonic balancer, valve covers, and Edelbrock EFI aluminum intake manifold.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.

This engine is covered by a 1 year written warranty.
(There is no warranty when using a Blower, Turbo, Super Charger or NOS)

If you have any questions regarding this item please call us at
D&J Machine & Performance Engines
(602) 395-0800 Mon-Fri 8:00AM to 5:00PM MST

Current Phoenix Time
NOTE: Arizona does not observe Daylight Savings Time
or email us at enginebuilder_1

Purchasing
Purchasing

How to purchase this Tuff Dawg Engine

 

Home ] Up ]

Send mail to webmaster with questions or comments about this web site.
Copyright 2011 D&J Machine & Performance Engines