The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

• 3.500" stroke crank
• 5.778" forged rods with ARP rod bolts
• 10 to 1 compression pistons

More special features of this engine include:

• Seasoned block that has been vatted, magnafluxed for cracks, thermal cleaned and steelabrated, bored, honed and plateau honed to fit new oversized pistons
• Deck head gasket surface on block with overhead CBN Mill to ensure a good long lasting seal
• New CompCams Split-duration hydraulic cam
• Installed on this engine is the aluminum 3V closed chamber heads
• 3-angle valve job
• These aluminum 3V heads have been used in the place of the American heads to increase compression and maintain low-end performance and boost all-around power
• Will work with stock 4 barrel exhaust manifolds or 4 barrel headers
• New Bronze valve guides and hardened exhaust seats installed for use with unleaded premium fuel
• Assembled with all New 2.190"Int/1.710"Exh stainless valves with undercut stems for better flow
• New High performance valve springs setup to be used with CompCam's split-duration cam
• New Screw-in rocker studs with guide plates and full roller rocker arms for added strength
• New Oversize pistons and matching rings
• New Heavy duty double row timing set
• New High volume oil pump
• Oil modifications to give a good constant oil supply
• Heat treated & CNC milled oil driveshaft for added strength
• New Brass expansion plugs
• New Main and rod bearings to fit 3.500" stroke crankshaft
• New Edelbrock Performer 4V aluminum intake manifold
• This engine comes with a 2" high intake to carb spacer to increase plenum volume. This spacer increases the carb-to-plenum floor distance which atomizes the fuel better and also enhances low-rpm torque and throttle response. This engine takes a square bore carb. This engine works best with a 750cfm Holley carb (not included) and a 2800 rpm stall speed converter if being used with a automatic transmission
• All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with front sump oil pan, timing cover, harmonic balancer, aluminum valve covers, and Edelbrock Performer 4V aluminum intake manifold.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.