The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

• 3.780" stroke nodular iron crank
• 6.488" big beam forged rods with ARP rod bolts
• 9½ to 1 compression pistons

More special features of this engine include:

• Seasoned 2-bolt main block
• Deck head gasket surface on block to ensure a good seal
• New Hydraulic flat tappet cam that is designed to produce strong torque with excellent throttle response in a heavy body 4x4 which we will custom match to your specific application and use
• Heads have 2.030"Int/1.560"Exh valves
• New Hardened exhaust seats for use with leaded or unleaded fuel
• New 1.440" high performance springs set up to match cam
• New Spiral-type valve guides for better oil retention
• New Perfect Circle rings
• New Double row timing set
• New High volume oil pump with steel drive shaft and bolt on oil pickup tube
• New Brass expansion plugs
• New Edelbrock Performer RPM aluminum intake manifold. This dual plane intake constant cross-sectional area design builds low end and mid-range acceleration while optimized runner path make top-end hp
• All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with 4x4 oil pan, timing cover, harmonic balancer, valve covers, and intake manifold.

This Is A Real Turnkey Engine

This engine has been started on gas and run. The camshaft has been broken in and the valves adjusted. The 4150 throttle body and timing has been initially set, but should be checked after installing in vehicle.

Also included and installed on engine:

• New EZ-EFI^® self tuning fuel system. Complete package including ecu, throttle body, fuel rails, wide band O₂ sensor, wiring harness, fuel injectors, and electric fuel pump. The easy to use setup wizard provides a comprehensive walk through and the system tunes itself.
• New Electric fuel pump.
• New Fuel regulator
• Chrome air cleaner
• Fuel filter
• Electronic distributor and coil
• Spark plugs and spark plug wires
• Water pump
• Crankshaft and water pump pulleys
• Alternator with bracket and alternator belt
• Starter
• Water outlet and thermostat
• Starter alignment plate for back of block
• A/T Flexplate with bolts
• This engine has been started on gas and run. The 4150 throttle body and timing has been initially set, but should be checked after installing in vehicle.

Not included on this engine:

Exhaust manifolds, hoses, fan, accessory belts (except alternator belt), radiator, linkage or miscellaneous.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.