|
This Ford 428 crate engine by Tuff Dawg Engines would be EXCELLENT for a street/strip car, street rod, pickup, or your daily driver. Remove that old Ford 352, Ford 360, Ford 390, Ford 410, or Ford 428 and
install this 477HP Ford 428 crate engine by Tuff Dawg Engines to bring your ride to life! This Ford 428 is a direct
bolt-in, but you must use a Ford 428 flywheel or flexplate with this engine. This
Ford 428 does not just have horsepower, it also has 503 ft lbs of torque at
4500rpm to really push you back in the drivers seat! This engine will run on
leaded or unleaded Premium fuel.
The balanced rotating assembly (typically includes crankshaft,
pistons, rings, connecting rods, rod bearings, and balancer) featured in
this engine:
- 3.980" stroke nodular iron crank
- 6.488" big beam forged rods with ARP rod bolts
- 10 to 1 compression pistons
More special features of this engine include:
- Seasoned 428 2-bolt main block
- New Hydraulic flat tappet cam with .562"Int/.565"Exh valve lift
- New Edelbrock Aluminum Heads made from A356 aluminum that are 18lbs lighter than the cast iron heads
with 2.090"Int/1.650"Exh swirl polished stainless 1-pc valves with undercut stems for improved flow
- These Edelbrock Aluminum heads come with both 8-bolt and 16-bolt "CJ" exhaust bolt patterns. (Note: These heads DO NOT come with the 14-bolt "GT" exhaust bolt pattern)
- New Hardened exhaust seats for use with leaded or unleaded fuel
- New 1.440" high performance springs set up to match cam
- New Bronze valve guides for better oil retention
- New Perfect Circle rings
- New Double row timing set
- New High volume oil pump with steel drive shaft and bolt on oil
pickup tube
- New Brass expansion plugs
- New Edelbrock Performer RPM aluminum intake manifold. This dual
plane intake constant cross-sectional area design builds low end and
mid-range acceleration while optimized runner path make top-end hp
- For those of you that have the hood clearance we will include a 2"
high intake to carb spacer to increase plenum volume. This spacer
increases the carb-to-plenum floor distance which atomizes the fuel better
and also enhances low-rpm torque and throttle response. This engine takes
a square bore carb. It works best with a 750cfm carb (not included)
- All parts are painted separately before assembly for that show quality
look
This engine comes completely assembled with oil pan, timing cover,
harmonic balancer, valve covers, and intake manifold.
This engine is custom built from start to finish in our
state of the art facility by professionals that take pride in their
work to guarantee that you get a top quality engine the first time!.
This engine is covered by a 1 year written warranty.
(There is no warranty when using a Blower, Turbo, Super Charger or NOS)
If you have any questions regarding this item please call us at
D&J Machine & Performance Engines
(602) 395-0800 Mon-Fri 8:00AM to 5:00PM MST
Current Phoenix Time NOTE: Arizona does not observe Daylight Savings Time
or email us at
enginebuilder_1
-

- Purchasing
-
How to purchase this Tuff Dawg Engine
|