[Company Logo Image]

Home Feedback Contents Search

Ford 429



Ford 429 Crate Engine by Tuff Dawg Engines This Ford 429 with aluminum heads crate engine by Tuff Dawg Engines would be EXCELLENT for a street/strip car, street rod, pickup (engine comes with front sump oil pan so if it is going into a pickup the oil pan would need to be changed). Remove that old worn out Ford 429 or Ford 460 and install this Ford 429 crate engine by Tuff Dawg Engines to bring your ride to life! This Ford 429 does not just have horsepower, it also has torque to really push you back in the drivers seat! This engine will run on leaded or unleaded Premium fuel. Works best with 3000 stall speed torque converter (not included) and comes with a new automatic transmission flexplate.

The balanced rotating assembly (typically includes crankshaft, forged pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

  • 3.590" stroke cast iron crank
  • 6.605" big beam forged rods with ARP rod bolts
  • 10 to 1 compression pistons

More special features of this engine include:

  • Seasoned 2-bolt main block, vatted, magnaflux checked for cracks, thermal cleaned, steelabrated, bored and honed and plateau honed to fit new pistons
  • Deck head gasket surface on block to ensure a good seal
  • New CompCams Hydraulic flat tappet cam with .584"Int/.588"Exh valve lift
  • Aluminum heads with 2.245"Int/1.744"Exh Cobra Jet size stainless swirl polished valves with undercut stems to improve flow - similar to Cobra Jet head
  • Screw-in studs and guide plates
  • New Hardened exhaust seats for use with leaded or unleaded fuel
  • New 1.440" high performance springs set up to match cam
  • New Spiral-type valve guides for better oil retention
  • New High temperature valves seals
  • New Hardened push rods
  • New Adjustable roller tip rocker arms
  • New Perfect Circle rings
  • New Double row timing set
  • New Oil pump with steel drive shaft and bolt on oil pickup tube
  • New Brass expansion plugs
  • New Edelbrock Performer RPM aluminum intake manifold. This dual plane intake constant cross-sectional area design builds low end and mid-range acceleration while optimized runner path make top-end hp
  • This engine takes a square bore carb. It works best with a 850cfm carb (not included)
  • All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with oil pan, timing cover, harmonic balancer, valve covers, and Edelbrock intake manifold. We even supply a new a/t flexplate with this engine.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.

This engine is covered by a 1 year written warranty.
(There is no warranty when using a Blower, Turbo, Super Charger or NOS)

If you have any questions regarding this item please call us at
D&J Machine & Performance Engines
(602) 395-0800 Mon-Fri 8:00AM to 5:00PM MST

Current Phoenix Time
NOTE: Arizona does not observe Daylight Savings Time
or email us at enginebuilder_1


How to purchase this Tuff Dawg Engine


Home ] Up ]

Send mail to webmaster with questions or comments about this web site.
Copyright 2011 D&J Machine & Performance Engines